Nissan Murano: Push-button ignition switch / Push-button ignition switch positions
LOCK (Normal parking position)
The ignition switch can only be locked in this position.
The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key.
The ignition switch will lock when any door is opened or closed with the ignition switched off.
ACC (Accessories)
This position activates electrical accessories, such as the radio, when the engine is not running.
ACC has a battery saver feature that will turn the ignition switch to the OFF position after a period of time under the following conditions:
- All doors are closed.
- The shift lever is in P (Park).
- The hazard lamps are off.
- The turn signals are off.
The battery saver feature will be canceled if any of the following occur:
- Any door is opened.
- The shift lever is moved out of P (Park).
- The ignition switch changes position.
- The hazard lamps are turned on.
ON (Normal operating position)
This position turns on the ignition system and electrical accessories.
ONhas a battery saver feature that will turn the ignition switch to the OFF position, if the vehicle is not running, after some time under the following conditions:
- All doors are closed.
- The shift lever is in P (Park).
- The hazard lamps are off.
- The turn signals are off.
The battery saver feature will be canceled if any of the following occur:
- Any door is opened.
- The shift lever is moved out of the P (Park) position.
- The ignition switch changes position.
- The hazard lamps are turned on.
- The turn signals are turned on.
CAUTION
Do not leave the vehicle with the ignition switch in the ACC or ON position when the engine is not running for an extended period.This candischargethe battery.
OFF
The ignition switch is in the OFF position when the engine is turned off using the ignition switch. The ignition switch heart beat function (pulsed illumination) may activate for a period of time when any door is unlocked and when the door opened/closed status changes in the OFF and ACC positions.
Operating range
The Intelligent Key functions can only be
used when the Intelligent Key is within the
specified operating range.
When the Intelligent Key battery is almost
discharged or strong radio waves are present
near the operating location, the Intelligent
Key system’s operating range becomes
narrower and may not function properly...
Emergency engine shut off
To shut off the engine in an emergency
situation while driving, perform the following
procedure:
Rapidly push the ignition switch three
consecutive times in less than 1...
Other information:
Nissan Murano 2015-2023 Owners Manual: How to enable/disable the BSW system
Perform the following steps to enable or disable the BSW system. Using “Settings” in the vehicle information display: Press the button until “Settings” displays in the vehicle information display and then press the OK button. Use the button to select “Driver Assistance...
Nissan Murano 2015-2023 Owners Manual: General maintenance
During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smells, be sure to check for the cause or have it checked promptly...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- How to enable/disable the LDW system
- Rear bench seat adjustment
- Intelligent Forward Collision Warning (I-FCW)
- New on site
- Most important about car
Driver and passenger supplemental knee air bag
Driver’s side
The knee air bag is located in the knee bolster, on the driver’s and passenger’s side. All of the information, cautions and warnings in this manual apply and must be followed. The knee air bag is designed to inflate in higher severity frontal collisions, although it may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. It may not inflate in certain collisions.
Passenger’s side
