Nissan Murano: Push-button ignition switch / Emergency engine shut off

Nissan Murano (Z52) 2015-2024 Owners Manual / Starting and driving / Push-button ignition switch / Emergency engine shut off

To shut off the engine in an emergency situation while driving, perform the following procedure:

Rapidly push the ignition switch three consecutive times in less than 1.5 seconds, or
Push and hold the ignition switch for more than 2 seconds.

Push-button ignition switch positions

LOCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key...

NISSAN Intelligent Key® battery discharge

If the battery of the NISSAN Intelligent Key® is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: Place the shift lever in the P (Park) position...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B26ff Intelligent Tuner Comm Err

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B26FF INTELLIGENT TUNER COMM ERR (Intelligent tuner communication error) Diagnosis condition When ignition switch is ON. Signal (terminal) BCM terminal 119 Threshold Inactive communication between BCM and remote keyless entry receiver Diagnosis delay time — POSSIBLE CAUSE Remote keyless entry receiver Harness or connector BCM FAIL-SAFE— DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: P0605 Control Module Rom

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0605 CONTROL MODULE ROM [Internal Control Module Read Only Memory (ROM) Error] Diagnosis condition When turning ON the ignition switch Signal — Threshold TCM ROM area sum parity check detects malfunction in ROM...