Nissan Murano: Power Window Control System :: Dtc/circuit Diagnosis / Power Window Serial Link

Encoder. Front Lh

Component Function Check CHECK ENCODER Check that driver side door glass performs AUTO open/close operation normally by main power window and door lock/unlock switch...

Main Power Window and Door Lock/unlock Switch

Component Function Check CHECK POWER WINDOW SWITCH OUTPUT SIGNAL CONSULT Select “CDL LOCK SW ” or “CDL UNLOCK SW” in “Data Monitor” mode of “BCM(DOOR LOCK)”...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Meter Control Switch

Removal and Installation REMOVALNOTE: The illumination control switch and trip reset switch are serviced as an assembly. Remove instrument lower panel LH (1). Refer to Removal and Installation. Remove warning buzzer. Refer to Removal and Installation...

Nissan Murano (Z52) 2015-2024 Service Manual: Meter Control Switch Signal Circuit

Diagnosis Procedure CHECK METER CONTROL SWITCH SIGNAL Ignition switch ON. Check voltage between the following terminals of the meter control switch harness connector. Meter control switch Condition Voltage (Approx.) Connector Terminals (+) (−) M27 7 4 When illumination control switch (−) is pressed 0 V Other than the above 5 V 5 When trip reset switch is pressed 0 V Other than the above 5 V 6 When illumination control switch (+) is pressed 0 V Other than the above 5 V Is the inspection result normal? YES>> Inspection End...