Nissan Murano: Steering System :: Unit Disassembly and Assembly / Power Steering Oil Pump
Disassembly and Assembly
The power steering oil pump is not serviceable and should be replaced as an assembly.
Refer to Removal and Installation.
Exploded View
1.
Outer socket
2.
Inner socket lock nut
3.
Small boot clamp
4.
Boot
5.
Large boot clamp
6.
Inner socket
7.
Spacer
8...
Steering Wheel
Steering wheel axial end play
0 mm (0 in)
Steering wheel play
0 - 35 mm (0 - 1.38 in)
Steering wheel turning force
39 N (4 kg-f, 9 lb-f) or less
Steering Angle
Unit: Degree minute (Decimal degree)
Inner wheel angle (A)
Minimum
34° 30′ (34...
Other information:
This vehicle is equipped with an Event Data
Recorder (EDR). The main purpose of an
EDR is to record, in certain crash or near
crash-like situations, such as an air bag
deployment or hitting a road obstacle, data
that will assist in understanding how a vehicle’s
systems performed...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detecting condition
B2401–86
IGN OPEN
(Ignition open)
Diagnosis condition
All times
Signal (terminal)
Ignition switch ON signal (CAN communication)
Threshold
When all of the following conditions are satisfied
CAN communication is normal
Automatic back door control module receives wake up signal via CAN communication with BCM
Automatic back door control module cannot detect ignition switch ON signal via CAN communication with IPDM E/R
Diagnosis delay time
–
B2401–87
IGN OPEN
(Ignition open)
Diagnosis condition
All times
Signal (terminal)
CAN communication
Threshold
When automatic back door control module can not communicate CAN communication signal
Diagnosis delay time
2 seconds
POSSIBLE CAUSE
CAN communication system
BCM
IPDM E/R
Automatic back door control module
FAIL-SAFEInhibit automatic back door system auto open/close function
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...