Nissan Murano: Heater & Air Conditioning System :: Symptom Diagnosis / Noise

Nissan Murano (Z52) 2015-2024 Service Manual / Ventilation, Heater & Air Conditioner / Heater & Air Conditioning System :: Symptom Diagnosis / Noise

Symptom Table

Symptom	Noise source	Probable cause	Corrective action
Unusual noise from compressor when A/C is ON.	Inside of A/C compressor	Worn, broken, or clogged internal components.	Check compressor oil. Refer to Inspection.
	Magnet clutch	Contact of clutch disc with pulley.	Check clearance between clutch disc and pulley.
	A/C compressor body	Loose A/C compressor mounting bolts.	Check torque of mounting bolts. Refer to Exploded View.
Unusual noise from cooler piping.	Cooler piping (pipe and flexible hose)	Improper installation of clip and bracket.	Check installation of cooler piping. Refer to Exploded View.
Unusual noise from expansion valve when A/C is ON.	Expansion valve	Low refrigerant charge.	Check for leaks. Refer to Leak Test. Recover refrigerant, evacuate system, and recharge with the specified amount of refrigerant. Refer to Recycle Refrigerant.
Unusual noise from expansion valve when A/C is ON.	Expansion valve	Worn, broken, or clogged internal components.	Eliminate foreign material from expansion valve or replace it.
Unusual noise from belt.	—	Loose belt.	Check belt tension. Refer to Checking Drive Belt.
Unusual noise from belt.	—	Damaged or broken components inside A/C compressor.	Replace A/C compressor. Refer to Removal and Installation.

Refrigeration System Symptoms

Trouble Diagnosis For Unusual Pressure Diagnose using a manifold gauge whenever system’s high and/or low side pressure(s) is/are unusual. The marker above the gauge scale in the following tables indicates the standard (usual) pressure range...

Heater & Air Conditioning System :: Periodic Maintenance

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Main Power Window and Door Lock/unlock Switch

Diagnosis Procedure CHECK POWER SUPPLY Ignition switch OFF. Disconnect main power window and door lock/unlock switch connectors. Ignition switch ON. Check voltage between main power window and door lock/unlock switch harness connectors and ground...

Nissan Murano (Z52) 2015-2024 Service Manual: P0705 Transmission Range Sensor a

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0705 T/M RANGE SENSOR A [Transmission Range Sensor A Circuit (PRNDL Input)] Diagnosis condition TCM power supply voltage: More than 11 V Signal Transmision range switch signal Threshold Two or more range signals simultaneously stay ON continuously Diagnosis delay time Maintained for 2 seconds POSSIBLE CAUSE Harness or connector (Short circuit between transmission range switch and TCM) Transmission range switch FAIL-SAFE Shift position indicator on combination meter is not displayed Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...