Nissan Murano: Dtc/circuit Diagnosis / Malfunction Area Chart

Nissan Murano (Z52) 2015-2024 Service Manual / Electrical & Power Control / Lan System :: Can / Dtc/circuit Diagnosis / Malfunction Area Chart

Vehicle CAN Communication Circuit

MAIN LINE

Malfunction area Reference
Main line between IPDM E/R and ABS actuator and electric unit (control unit) Diagnosis Procedure
Main line between ABS actuator and electric unit (control unit) and A/C auto amp. Diagnosis Procedure
Main line between A/C auto amp. and AWD control unit Diagnosis Procedure
Main line between A/C auto amp. and combination meter Diagnosis Procedure
Main line between AWD control unit and combination meter Diagnosis Procedure

BRANCH LINE

Malfunction area Reference
ECM branch line circuit Diagnosis Procedure
IPDM E/R branch line circuit Diagnosis Procedure
TCM branch line circuit Diagnosis Procedure
ABS actuator and electric unit (control unit) branch line circuit Diagnosis Procedure
Power steering control module branch line circuit Diagnosis Procedure
A/C auto amp. branch line circuit Diagnosis Procedure
Automatic back door control module branch line circuit Diagnosis Procedure
AWD control unit branch line circuit Diagnosis Procedure
Air bag diagnosis sensor unit branch line circuit Diagnosis Procedure
Combination meter branch line circuit Diagnosis Procedure
Steering angle sensor branch line circuit Diagnosis Procedure
BCM branch line circuit Diagnosis Procedure
ADAS control unit branch line circuit Diagnosis Procedure
Driver seat control unit branch line circuit Diagnosis Procedure

SHORT CIRCUIT

Malfunction area Reference
Nissan Murano Vehicle CAN communication circuit Diagnosis Procedure
ITS CAN Communication Circuit

MAIN LINE

Malfunction area Reference
Main line between sonar control unit and side radar RH Diagnosis Procedure
Main line between side radar RH and side radar LH Diagnosis Procedure
Main line between side radar LH and distance sensor Diagnosis Procedure

BRANCH LINE

Malfunction area Reference
Around view monitor control unit branch line circuit Diagnosis Procedure
Sonar control unit branch line circuit Diagnosis Procedure
Side radar RH branch line circuit Diagnosis Procedure
Side radar LH branch line circuit Diagnosis Procedure
Distance sensor branch line circuit Diagnosis Procedure

SHORT CIRCUIT OR OPEN CIRCUIT

Malfunction area Reference
ITS CAN communication circuit Diagnosis Procedure
Chassis CAN Communication Circuit

BRANCH LINE

Malfunction area Reference
Lane camera unit branch line circuit Diagnosis Procedure

SHORT CIRCUIT OR OPEN CIRCUIT

Malfunction area Reference
Chassis CAN communication circuit Diagnosis Procedure
IT CAN Communication Circuit

BRANCH LINE

Malfunction area Reference

AV control unit branch line circuit

Audio unit branch line circuit 		Diagnosis Procedure
TCU branch line circuit Diagnosis Procedure

SHORT CIRCUIT OR OPEN CIRCUIT

Malfunction area Reference
IT CAN communication circuit Diagnosis Procedure
Diagnostic CAN Communication Circuit

BRANCH LINE

Malfunction area Reference
Date link connector branch line circuit Diagnosis Procedure

SHORT CIRCUIT OR OPEN CIRCUIT

Malfunction area Reference
Diagnostic CAN communication circuit Diagnosis Procedure

    Dtc/circuit Diagnosis

    ..

    Main Line Between Ipdm-E and Abs Circuit

    Diagnosis Procedure CHECK HARNESS CONTINUITY (OPEN CIRCUIT) Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Disconnect the following harness connectors...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: C1704 Low Pressure Fl


    DTC Description NOTE: The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTCs Register TPMS sensor IDs DTC DETECTION LOGIC DTC No...

    Nissan Murano (Z52) 2015-2024 Owners Manual: Operating vehicle-to-vehicle distance control mode


    To turn on the cruise control, quickly push and release the CRUISE ON/OFF switch . The ICC system ON indicator (gray), set distance indicator and set vehicle speed indicator come on in a standby state for setting. If the Cruise Control Alerts are enabled in the Driver Assistance menu, then the “Cruise ON: Press SET to engage speed and distance control” message will appear in the vehicle information display...

    Categories

    Autolight system

    Nissan Murano. Autolight system

    The autolight system allows the headlights to turn on and off automatically. The autolight system can:

    Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.

    read more

     
    Copyright © 2026 www.nimurano.com