Nissan Murano: Power Supply, Ground & Circuit Elements :: Basic Inspection / Inspection and Adjustment. Additional Service When Removing Battery Negative Terminal

Nissan Murano (Z52) 2015-2024 Service Manual / Electrical & Power Control / Power Supply, Ground & Circuit Elements :: Basic Inspection / Inspection and Adjustment. Additional Service When Removing Battery Negative Terminal

Special Repair Requirement

Required Procedure After Battery Disconnection
System	Item	Reference
Engine Control System	Idle Air Volume Learning	Description
Door & Lock	Automatic Back Door Initialization	Description
Power Window Control System	Power Window System Initialization	Description
Roof	Moonroof Memory Reset/Initialization Sunshade Memory Reset/Initialization	Special Repair Requirement
Automatic Drive Positioner	Automatic Drive Positioner System Initialization	Refer to Owner's Manual.
Heater & Air Conditioning Control System	Temperature Setting Trimmer (front)	Temperature Seeting Trimmer (Front)
	Foot Position Setting Trimmer	Foot Position Setting Trimmer
	Inlet Port Memory Function (FRE)	Inlet Port Memory Function (FRE)
	Inlet Port Memory Function (REC)	Inlet Port Memory Function (REC)
Audio, Visual & Navigation System	Audio (Radio Preset)	Refer to Owner's Manual.
Audio, Visual & Navigation System	Navigation System	Refer to Owner's Manual.

Battery

How to Handle Battery CAUTION: If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery. After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact...

Fuse Inspection

How To Check If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Use fuse of specified rating. Never use fuse of more than specified rating...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Steering Gear and Linkage

Inspection BOOTCheck boot for cracks. Replace if any damage is found.OUTER SOCKET AND INNER SOCKET Ball joint swinging torque Hook the Tool at the measuring point and pull the Tool. Make sure that the Tool reads the specified value when ball stud and inner socket start to move...

Nissan Murano (Z52) 2015-2024 Service Manual: B2603 Shift Posi Status

DTC Description DTC DETECTION LOGICNOTE: If DTC B2603 is displayed with DTC B2601, first perform the trouble diagnosis for DTC B2601. Refer to DTC Description. DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B2603 SHIFT POSI STATUS (Shift position status) Diagnosis condition When ignition switch is ON...