Nissan Murano: Hood Lock / Hood Lock Release Handle
Removal and Installation
REMOVAL
Remove fuel filler lid/hood lock release handle bolts (A).

Disconnect fuel filler lid release cable (2) from fuel filler lid release handle (1).
Disconnect hood lock release cable (4) from hood lock release handle (3).
Remove hood lock release handle.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
REMOVALRemove fender protector (LH). Refer to Removal and Installation.
Remove front grille. Refer to Removal and Installation...
Other information:
Inspection and Repair
INSPECTIONWhen measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers 0 or battery voltage...
Trouble Diagnosis For Unusual Pressure
Diagnose using a manifold gauge whenever system’s high and/or low side pressure(s) is/are unusual. The marker above the gauge scale in the following tables indicates the standard (usual) pressure range.
Symptom Table
Gauge indication Refrigerant cycle Probable cause Corrective action
Both high and low pressure sides are too high...