Nissan Murano: Door & Lock :: Removal and Installation / Hood

Exploded View 1. Hood hinge (RH) 2. Hood 3. Hood stay (RH/LH) 4. Hood stay stud ball (LH/RH) 5. Bumper rubber (LH/RH) 6. Grommet 7...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Signal Buffer

CONSULT Function (BCM - SIGNAL BUFFER) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of the push-button ignition switch...

Nissan Murano (Z52) 2015-2024 Service Manual: P0500 Vss

DTC Description DESCRIPTIONECM receives vehicle speed signals from two different paths via CAN communication line: One is from the ABS actuator and electric unit (control unit) via the combination unit and the other is from TCM.DTC DETECTION LOGICAt 20 km/h (13 MPH), ECM detects the following status continuously for 5 seconds or more: The difference between a Nissan Murano vehicle speed calculated by a output speed sensor transmitted from TCM to ECM via CAN communication and the Nissan Murano vehicle speed indicated on the combination meter exceeds 15km/h (10 MPH)...

Categories

Driver and passenger supplemental knee air bag

Nissan Murano. Driver and passenger supplemental knee air bag

Driver’s side

The knee air bag is located in the knee bolster, on the driver’s and passenger’s side. All of the information, cautions and warnings in this manual apply and must be followed. The knee air bag is designed to inflate in higher severity frontal collisions, although it may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. It may not inflate in certain collisions.