Nissan Murano: Fuel Filler Lid Opener / Fuel Filler Lid
Exploded View

| 1. |
Fuel filler lid |
2. |
Fuel filler lid release handle and hood lock |
3. |
Fuel filler release cable |
| 4. |
Fuel filler lid lock |
 |
Clip |
|
|
Removal and Installation
REMOVAL
Remove fuel cap pin.
Remove screws and fuel filler lid.
Remove fuel filler lid spring and bumper rubber from fuel filler lid (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid open/close and lock/unlock operation.
Removal and Installation
REMOVALRemove luggage side lower finisher (LH). Refer to Removal and Installation.
Disconnect the fuel filler lid release cable from the fuel filler lid lock...
Other information:
System Description
SYSTEM DIAGRAMOUTLINE
BCM reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the status of each switch.
BCM has a combination of 5 output terminals (OUTPUT 1 - 5) and 5 input terminals (INPUT 1 - 5) and reads a maximum of 19 switch states...
Component Function Check
INSPECTION START
Turn ignition switch OFF, and restart engine.
Does the engine start?
YES>>
With CONSULT: GO TO 2.
YES>>
Without CONSULT: GO TO 3.
NO>>
Proceed to Diagnosis Procedure.
CHECK IGNITION SIGNAL FUNCTION
With CONSULT
Perform “POWER BALANCE” in “ACTIVE TEST” mode with CONSULT...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more