Nissan Murano: Dtc/circuit Diagnosis / Front Side Marker Lamp Circuit

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Exterior Lighting System :: Led Headlamp / Dtc/circuit Diagnosis / Front Side Marker Lamp Circuit

Component Function Check

CHECK PARKING LAMP OPERATION

Check that the parking lamp is turned ON.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Check parking lamp circuit. Refer to Component Function Check.

CHECK FRONT SIDE MARKER LAMP OPERATION

CONSULT

  1. Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R”.

  2. While operating the test items, check that the front side marker lamp is turned ON.

    TAIL : Front side marker lamp ON
    Off : Front side marker lamp OFF

Is the inspection result normal?

YES>>

Front side marker lamp circuit is normal.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK FRONT SIDE MARKER LAMP BULB

Check applicable lamp bulb.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace bulb.

CHECK FRONT SIDE MARKER LAMP POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect IPDM E/R connector and front combination lamp connector.

  3. Check continuity between IPDM E/R harness connector and front combination lamp harness connector.

    Front combination lamp IPDM E/R Continuity
    Connector Terminal Connector Terminal
    RH E243 3 E218 90 Yes
    LH E247

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness.

CHECK FRONT SIDE MARKER LAMP GROUND CIRCUIT

Check continuity between front side marker lamp harness connector and ground.

Front combination lamp — Continuity
Connector Terminal
RH E243 7 Ground Yes
LH E247

Is the inspection result normal?

YES>>

Check corresponding bulb socket and harness. Repair or replace if necessary.

NO>>

Repair or replace harness.

    Parking Lamp Circuit

    Component Function Check CHECK PARKING LAMP OPERATION CONSULT Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R”. While operating the test items, check that the parking lamp is turned ON...

    Tail Lamp Circuit

    Component Function Check CHECK TAIL LAMP OPERATION CONSULT Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R”. While operating the test items, check that the tail lamp is turned ON...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: U1002 System Comm (can)


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen item (Trouble diagnosis content) DTC detected condition U1002 SYSTEM COMM (CAN) (CAN system communication) Diagnosis condition When ignition switch ON. When power supply voltage is normal...

    Nissan Murano (Z52) 2015-2024 Service Manual: Component Parts. Sonar System


    Component Parts Location No. Component Function 1. Rear sonar sensor RH inner Refer to Sonar Sensor. 2. Rear sonar sensor RH outer 3. Around view monitor control unit (if equipped) Around view monitor control unit transmits the setting change request signal to sonar control unit via CAN communication...

    Categories

    Fuel gauge

    Nissan Murano. Fuel gauge

    The gauge indicates the approximate fuel level in the tank.

    The gauge may move slightly during braking, turning, acceleration, or going up or down hills.

    The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.

    read more

     
    Copyright © 2026 www.nimurano.com