Nissan Murano: Engine / Engine Lubrication System :: Removal and Installation

Nissan Murano (Z52) 2015-2024 Service Manual / Engine / Engine Lubrication System :: Removal and Installation

Oil Filter

Removal and Installation REMOVALDrain engine oil. Refer to Changing Engine Oil. Remove front fender protector side cover (RH). Refer to Removal and Installation...

Oil Pump

Removal and Installation REMOVALRemove the engine from the vehicle. Refer to Removal and Installation (FWD) or Removal and Installation (AWD). Remove the upper oil pan...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: C1a23 Unit Low Temp

DTC Description DTC DETECTION LOGIC DTC Trouble diagnosis name DTC detecting condition C1A23 (97) UNIT LOW TEMP Temperature detected by the temperature sensor integrated in distance sensor (ICC sensor) remains less than -40 °C for 5 seconds or more POSSIBLE CAUSETemperature around the distance sensor (ICC sensor) becomes extremely lowFAIL-SAFEThe following systems are canceled...

Nissan Murano (Z52) 2015-2024 Service Manual: Front Axle :: Unit Disassembly and Assembly. Front Drive Shaft

Exploded View (LH) 1. Shaft with damper 2. Circular clip 3. Dust shield 4. Housing 5. Snap ring 6. Spider assembly 7. Stopper ring 8. Boot 9. Boot band 10. Joint sub-assembly Wheel side Fill with Genuine NISSAN Grease...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.