Nissan Murano: Lan System :: Can Gateway / Dtc/circuit Diagnosis

Configuration (can Gateway). 3ch Can Gateway

Work Procedure (Before Replacement) CHECKING TYPE ID (1) Use EPC (service parts catalogue) to search 3CH CAN gateway of the applicable Nissan Murano vehicle and find “Type ID”...

B2600-46 Config Error

DTC Description DTC DETECTION LOGIC DTC Trouble diagnosis (Trouble diagnosis contents) Detecting condition B2600-46 CONFIG ERROR (Configuration error) [CALIB/PRMTER MEMORY ERROR] When errors are detected in the configuration data stored in the 3CH CAN gateway...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Accelerator Pedal Released Position Learning

Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time the harness connector of the accelerator pedal position sensor or ECM is disconnected...

Nissan Murano (Z52) 2015-2024 Service Manual: Center Pillar Upper Finisher

Removal and Installation REMOVALRemove center pillar lower finisher. Refer to Removal and Installation. Release pawls, using a suitable tool (A) and remove seat belt height adjuster bolt cover (LH). : Pawl Remove seat belt d-ring anchor bolt. Release center pillar upper finisher (1) pawl and clips using a suitable tool...