Nissan Murano: System Description / Diagnosis System (av Control Unit)
Description
Refer to Description (Navigation without Bose) or Description (Navigation with Bose).
On Board Diagnosis Function
Refer to On Board Diagnosis Function (Navigation without Bose) or On Board Diagnosis Function (Navigation without Bose).
CONSULT Function
Refer to CONSULT Function (Navigation without Bose) or CONSULT Function(Navigation with Bose).
CONSULT Function
CONSULT FUNCTIONSCONSULT performs the following functions via communication with the around view monitor control unit. Direct Diagnostic Mode Description
ECU Identification
The around view monitor control unit part number is displayed...
Other information:
Removal and Installation
CAUTION:
Replace the automatic back door control module if it has been dropped or sustained an impact.
REMOVALRemove luggage side lower finisher (LH). Refer to Removal and Installation.
Disconnect the harness connectors from the automatic back door control module...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition
C1A17–(44, 45, 46, 47, 48, 49)
CONTROL UNIT
Diagnosis condition
When Ignition switch is ON.
Signal (terminal)
—
Threshold
If distance sensor (ICC sensor) is malfunctioning
Diagnosis delay time
—
NOTE:
If any DTC “C1A17” is detected along with DTC “U1000”, first diagnose the DTC “U1000”...