Nissan Murano: System Description / Diagnosis System (adas Control Unit 2)
CONSULT Function (ICC/ADAS)
For information regarding ADAS control unit CONSULT functions, refer to CONSULT Function (ICC/ADAS).
Precautions for Intelligent Cruise Control
ICC system is only an aid to assist the driver and is not a collision warning or avoidance system. It is the driver's responsibility to stay alert, drive safely and be in control of the Nissan Murano vehicle at all times...
CONSULT Function (LASER/RADAR)
APPLICATION ITEMSCONSULT performs the following functions via CAN communication with ADAS control unit and the communication with distance sensor (ICC sensor)...
Other information:
Diagnosis Procedure
The MAIN switch can be turned ON/OFF, but the ICC system cannot be set even if the SET/COAST switch is pressed.NOTE:
The system cannot be set in the following cases:
When the Nissan Murano vehicle ahead is not detected below the speed of 32 km/h (20 MPH)...
DTC Description
DTC DETECTION LOGICECM detects a sloshing signal from the EVAP control system pressure sensor. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0454
EVAP SYS PRES SEN
(Evaporative emission system pressure sensor/switch range/performance)
Diagnosis condition
—
Signal (terminal)
Voltage signal transmitted from EVAP control system pressure sensor to ECM
Threshold
ECM detects a sloshing signal from the EVAP control system pressure sensor
Diagnosis delay time
—
POSSIBLE CAUSE
Harness or connectors
(EVAP control system pressure sensor circuit is shorted...