Nissan Murano: Cruise Control & Driver Assistance / Cruise Control System :: Ascd
Exploded View
1.
Steering wheel
2.
Cover
3.
Steering switches
4.
Driver air bag module
A.
Refer to Exploded View.
Pawl
Removal and Installation
REMOVALNOTE:
The ICC steering and audio switches are serviced as an assembly...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Other information:
Exploded View
1.
Transfer case assembly
2.
Drive shaft oil seal
3.
Transfer cover oil seal
Removal and Installation
REMOVALRemove the front drive shaft (RH). Refer to Removal & Installation.
Remove bolts and remove front drive shaft support bracket (RH)...
DTC Description
DTC DETECTION LOGICMalfunction related to AWD solenoid has been detected. DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detecting condition
C1204
4WD SOLENOID
(4WD solenoid)
Diagnosis condition
Ignition switch: ON
Signal
—
Threshold
—
Diagnosis delay time
—
POSSIBLE CAUSE
Internal malfunction of electronic controlled coupling
Malfunction of AWD solenoid power supply circuit (open or short)
Malfunction of AWD solenoid command current
FAIL-SAFEFront-wheel drive or shifts to 4-wheel drive (rear-wheels still have some driving torque)...
Categories

LATCH system lower anchor locations -
bench seat
Your vehicle is equipped with special anchor
points that are used with LATCH system
compatible child restraints. This system
may also be referred to as the ISOFIX
or ISOFIX compatible system. With this system,
you do not have to use a vehicle seat
belt to secure the child restraint unless the
combined weight of the child and child restraint
exceeds 65 lbs. (29.5 kg). If the combined
weight of the child and child restraint
is greater than 65 lbs. (29.5 kg), use the vehicle’s
seat belt (not the lower anchors) to
install the child restraint. Be sure to follow
the child restraint manufacturer’s instructions
for installation.
read more