Nissan Murano: Electrical & Power Control / Charging System :: Service Data and Specifications (sds). Service Data and Specifications (sds)
| Application | VQ35DE |
| Type* | A003TJ4791ZC |
| Mitsubishi | |
| Nominal rating | 12V-130A |
| Ground polarity | Negative |
| Minimum revolution under no-load | 1,000 rpm |
| Hot output current (when 13.5 volts are applied) |
More than 108A/2,500 rpm More than 124A/5,000 rpm |
| Regulated output voltage | 14.1 - 14.7V @ 20°C (68°F) |
*: Always check with the Parts Department for the latest parts information.
Charging System :: Removal and Installation. Generator
Exploded View
1.
Generator bracket
2.
Generator
3.
"B" terminal nut
Front
Removal and Installation
REMOVALRemove radiator assembly...
Power Supply, Ground & Circuit Elements :: Precaution. Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Wheel and Tire
Exploded View 1. Wheel and tire 2. Wheel nut Removal and Installation REMOVALRemove wheel nuts using power tool. Remove wheel and tire.INSTALLATIONInstallation is in reverse order of removal.CAUTION: When installing wheel nuts, tighten them diagonally by dividing the work two or three times in order to prevent wheels from developing any distortion...
Nissan Murano (Z52) 2015-2024 Owners Manual: Vehicle-to-vehicle distance control mode switches
The system is operated by the CRUISE ON/OFF switch and four control switches, all mounted on the steering wheel. CANCEL switch:Deactivates the system without erasing the set speed. RES/+ switch:Resumes set speed or increases speed incrementally...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Power Steering Fluid (PSF)
- Checking engine oil level
- Fuel recommendation
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
