Check brake pad wear thickness from an inspection hole (A) on cylinder body. Check using a scale if necessary.
Other information:
Compressor
Type
Variable displacement swash plate
Displacement
175 cm3 (10.7 cu in)/rev
Number of cylinders
10
Cylinder bore diameter × stroke
30.5 x 24 mm (1.2 x 0.9 in)
Direction of rotation
Clockwise (viewed from clutch)
Drive belt
Poly V 7 grooves
Disc to pulley clearance
Standard
0...
Inspection and Repair
INSPECTIONWhen measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers 0 or battery voltage...