Nissan Murano: Towing safety / Ball mount

Hitch ball

Choose a hitch ball of the proper size and weight rating for your trailer: The required hitch ball size is stamped on most trailer couplers. Most hitch balls also have the size printed on the top of the ball...

Weight carrying hitches

A weight carrying or “dead weight” ball mount is one that is designed to carry the whole amount of tongue weight and gross weight directly on the ball mount and on the receiver...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P062f Ecm

DTC Description DTC DETECTION LOGIC ECM back up system does not function properly. EEPROM (built-in microcomputer) system internal ECM does not function properly. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0603 ECM BACK UP/CIRCUIT [Internal Control Module Keep Alive Memory (KAM) Error] Diagnosis condition Ignition switch ON Signal (terminal) — Threshold ECM back up system does not function properly Diagnosis delay time — P062F CONTROL MODULE (Internal control module EEPROM error) Diagnosis condition Start engine and let it idle Signal (terminal) — Threshold EEPROM (built-in microcomputer) system internal ECM does not function properly Diagnosis delay time — POSSIBLE CAUSEDTC P0603 Harness or connectors [ECM power supply circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: Power Window and Door Lock/unlock Switch Rh

Description Main power window and door lock/unlock switch, power window and door lock/unlock switch RH and BCM transmit and receive the signal by power window serial link.The signal mentioned below is transmitted from BCM to main power window and door lock/unlock switch and power window and door lock/unlock switch RH Keyless power window down signal The signal mentioned below is transmitted from main power window and door lock/unlock switch to power window and door lock/unlock switch RH Front door window RH operation signal Retained power operation signal Power window lock switch signal Component Function Check CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH OUTPUT SIGNAL CONSULT Select “CDL LOCK SW ” or “CDL UNLOCK SW” in “Data Monitor” mode of “BCM(DOOR LOCK)”...