Nissan Murano: Door & Lock :: Symptom Diagnosis / Automatic Back Door Warning Does Not Operate. Buzzer
Automatic back door warning buzzer does not operate when automatic back door warning function is performed.
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with automatic back door control module.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Perform trouble diagnosis relevant to DTC indicated.
CHECK AUTOMATIC BACK DOOR WARNING BUZZER
Check automatic back door warning buzzer.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
-
Replace automatic back door control module. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
Closure Function
Diagnosis Procedure
Back door auto closure function does not operate when back door closing operations are performed.CHECK HALF LATCH SWITCH
Check half latch switch...
Automatic Back Door Functions Do Not Cancel
Diagnosis Procedure
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
Replace automatic back door control module. Refer to Removal and Installation.
Confirm the operation after replacement...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Rh Seat
Seatback DISASSEMBLYWARNING: Do not leave any objects (screwdrivers, tools, etc.) on the seat during seatback repair. It can lead to personal injury if the side air bag module should accidentally deploy. CAUTION: Before servicing, place ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes...
Nissan Murano (Z52) 2015-2024 Service Manual: P0101 Maf Sensor
DTC Description DTC DETECTION LOGIC A high voltage from the sensor is sent to ECM under light load driving condition. A low voltage from the sensor is sent to ECM under heavy load driving condition. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0101 MAF SEN/CIRCUIT-B1 (Mass or volume air flow “A” circuit range/performance) 1 Diagnosis condition — Signal (terminal) Voltage signal transmitted from MAF sensor to ECM Threshold A high voltage from the sensor is sent to ECM under light load driving condition Diagnosis delay time — 2 Diagnosis condition — Signal (terminal) Voltage signal transmitted from MAF sensor to ECM Threshold A low voltage from the sensor is sent to ECM under heavy load driving condition Diagnosis delay time — POSSIBLE CAUSE Harness and connectors (The sensor circuit is open or shorted...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Rear bench seat adjustment
- Intelligent Forward Collision Warning (I-FCW)
- Indicator lights
- New on site
- Most important about car
Vehicle security system
Your vehicle has two types of security systems:
Vehicle security system NISSAN Vehicle Immobilizer SystemThe vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
