Nissan Murano: Rear Lh Side Power Window Alone Does Not Operate / When Rear Power Window Switch Lh Is Operated
Diagnosis Procedure
REPLACE REAR POWER WINDOW SWITCH LH
Replace rear power window switch LH.
Refer to Removal and Installation.
>>
Inspection End.
Diagnosis Procedure
CHECK REAR POWER WINDOW SWITCH LH SERIAL LINK CIRCUIT
Check rear power window switch LH serial link circuit.
Refer to Diagnosis Procedure...
Diagnosis Procedure
CHECK REAR POWER WINDOW SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window switch power supply and ground circuit.
Refer to Diagnosis Procedure...
Other information:
Exploded View
1.
Final drive bracket
2.
Stopper
3.
Rear final drive assembly
Removal and Installation
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
Before replacing, servicing, or repairing rear final drive assembly due to vibration and/or noise when making low speed turns, refer to TSB to assist in proper diagnosis...
DTC Description
DESCRIPTIONBrake switch signal is applied to the ECM via the stop lamp switch when the brake pedal is depressed. This signal is used mainly to decrease the engine speed when the Nissan Murano vehicle is driven.DTC DETECTION LOGICA brake switch signal is not sent to ECM for extremely long time while the vehicle is driving...