Nissan Murano: Transaxle & Transmission :: Cvt: Re0f10j / Unit Removal and Installation

Plug

Description Replace the O-ring if oil leaks from the plug. Exploded View 1. Transaxle assembly 2. O-ring 3. Plug : Apply CVT fluid   Removal and Installation NOTE: Replace the O-rings if oil leaks from the plugs...

Transmission Assembly

Exploded View FWD Models 1. Gusset 2. Transaxle assembly 3. O-ring 4. CVT fluid charging pipe 5. Water outlet 6. CVT fluid charging pipe cap A...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Meter Control Switch Signal Circuit

Diagnosis Procedure CHECK METER CONTROL SWITCH SIGNAL Ignition switch ON. Check voltage between the following terminals of the meter control switch harness connector. Meter control switch Condition Voltage (Approx.) Connector Terminals (+) (−) M27 7 4 When illumination control switch (−) is pressed 0 V Other than the above 5 V 5 When trip reset switch is pressed 0 V Other than the above 5 V 6 When illumination control switch (+) is pressed 0 V Other than the above 5 V Is the inspection result normal? YES>> Inspection End...

Nissan Murano (Z52) 2015-2024 Service Manual: P0643 Sensor Power Supply

DTC Description DESCRIPTIONECM supplies a voltage of 5 V to some of the sensors systematically divided into 2 groups, respectively. Accordingly, when a short circuit develops in a sensor power source, a malfunction may occur simultaneously in the sensors belonging to the same group as the short-circuited sensor...