Other information:
Inspection and Adjustment
INSPECTIONCheck brake pad wear thickness from an inspection hole (A) on cylinder body. Check using a scale if necessary. Wear thickness
: Refer to Front Disc Brake.
ADJUSTMENTCAUTION:
Burnish contact surfaces between brake pads and disc rotor according to the following procedure after refinishing the disc rotor, replacing brake pads or if a soft pedal occurs at very low mileage...
Diagnosis Procedure
MAIN switch does not turn ON
ICC system display does not appear even when MAIN switch is pressed.
MAIN switch does not turn OFF
When ICC system display is ON, display does not turn OFF even if MAIN switch is pressed.
NOTE:
When ICC system warning lamp illuminates, perform the self-diagnosis of ICC system, and then repair or replace the malfunctioning parts...