Nissan Murano: Removal and Installation / Steering Vibration Motor
Removal and Installation
The steering vibration motor is an integral part of the steering wheel.
If replacement of the steering vibration motor is necessary, replace the steering wheel. Refer to Removal and Installation.
Exploded View
1.
Upper switch carrier
2.
Middle switch carrier
3.
Heated steering wheel switch (if equipped)
4.
VDC OFF switch
5.
Automatic back door switch (if equipped)
6...
Other information:
System Description
SYSTEM DIAGRAMAV Control Unit Input Signal (AV Communication)Transmit unitSignal name
Combination meter
Steering switch signal
AV Control Unit Input Signal (CAN Communication)Transmit unitSignal name
BCM
Door switches state signal
Combination meter
Nissan Murano Vehicle speed signal
Hand brake switch signal
ECM
Engine RPM Signal
IPDM E/R
Battery voltage signal
AUDIO SYSTEMThe audio system consists of the following components:
AV control unit
Instrument panel tweeters
Front door speakers
Rear door speakers
Front auxiliary input jacks
Front auxiliary input jacks control unit
Microphone
Steering switches
Combination meter
Combination switch (spiral cable)
Accessory relay-2
Antenna base (AM/FM antenna, antenna amp...
Description
Performing the following procedure can automatically activate recommunication of ECM and BCM, but only when the ECM is replaced with a new one*.*: New one means an ECM that has never been energized on-board.(In this step, initialization procedure by CONSULT is not necessary)CAUTION:
When replacing the ECM, a new ECM must be used...
Categories

The autolight system allows the headlights
to turn on and off automatically. The autolight
system can:
Turn on the headlights, front parking,
tail, license plate and instrument panel
lights automatically when it is dark.
Turn off all the lights (except daylight
running lights) when it is light.
Keep all the lights on for a period of time
after you place the ignition switch in the
OFF position and all doors are closed.
read more