Nissan Murano: Basic Inspection / Procedure for Temporarily Disabling the Ignition Battery Saver System
Description
The ignition battery saver system can be temporarily disabled, without using CONSULT, to prevent it from functioning when performing trouble diagnosis.
Work Procedure
-
Enter the vehicle carrying a registered Intelligent Key.
-
Push-button ignition switch OFF.
-
Without depressing the brake pedal, press and hold the push-button ignition switch continuously for ten seconds.
-
Check that the buzzer in the combination meter sounds for two seconds.
-
Operation is completed.
NOTE:
When the ignition switch is in any position other than ON, the ignition battery saver system is activated again.
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs)...
Other information:
Inspection
COMPONENT PARTCheck the front suspension for the following:
Check each component for looseness or play.
Inspect each component for abnormal wear or damage.
Ball Joint Axial End PlayWARNING:
When moving the front tires up and down by hand, place a jack (A) at the rear floor jack lift point to stabilize the Nissan Murano vehicle or the vehicle could rock and fall off the lift resulting in serious personal injury or death...
Exploded View
1.
Back plate
2.
Parking brake shoe (front)
3.
Adjuster
4.
Adjuster spring
5.
Return spring
6.
Anti-rattle spring
7.
Retainer
8.
Anti-rattle pin
9.
Toggle lever
10.
Parking brake shoe (rear)
Front
Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease
Removal and Installation
REMOVALWARNING:
Clean dust on the parking brake shoes with a vacuum dust collector to minimize the hazard of air borne particles or other materials...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more