Other information:
Component Function Check
CHECK FUNCTION
CONSULT
Select “REQ SW-DR” or “REQ SW-AS” in “Data Monitor” mode of “BCM(INTELLIGENT KEY)”.
Check that the function operates normally according to the following conditions:
Monitor Item Condition Status
REQ SW -DR
LH door request switch
Pressed
ON
Released
OFF
REQ SW -AS
RH door request switch
Pressed
ON
Released
OFF
Is the inspection result normal?
YES>>
Front door request switch is OK...
Removal and Installation
REMOVALMove front seat to full forward position.
Remove front kicking plate. Refer to Removal and Installation - Front Kicking Plate.
Remove rear kicking plate. Refer to Removal and Installation - Rear Kicking Plate.
Release center pillar lower finisher clips and pawls using a suitable tool and remove...