Nissan Murano: System / Integrated Control of Engine, Cvt, and Abs

Nissan Murano (Z52) 2015-2024 Service Manual / Engine / Engine Control System :: Vq35de / System Description / System / Integrated Control of Engine, Cvt, and Abs

System Description

Real time communications (signal exchange) among control units (e.g. ECM, CVT, ABS, and combination meter) via CAN communication optimizes engine torque and lock-up during gear shift and prevents engine speed from decreasing during deceleration.

    Variable Induction Air System

    System Description SYSTEM DIAGRAMSYSTEM DESCRIPTIONIn the medium speed range, the ECM sends the ON signal to the VIAS control solenoid valve. This signal introduces the intake manifold vacuum into the power valve actuator and therefore closes the power valve...

    Can Communication

    System Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-Nissan Murano vehicle multiplex communication line with high data communication speed and excellent error detection ability...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: P062f Eeprom


    DTC Description TCM compares the calculated value stored in the flash ROM with the value stored in TCM. If the calculated value does not agree with the stored value, TCM judges this as a malfunction.DTC DETECTION LOGICFlash ROM error is detected when turning ON the ignition switch...

    Nissan Murano (Z52) 2015-2024 Service Manual: Vin Registration


    Description VIN Registration is an operation to register VIN in ECM. It must be performed each time ECM is replaced.NOTE: Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). For details, refer to Work Procedure...

    Categories

    Vehicle security system

    Nissan Murano. Vehicle security system

    Your vehicle has two types of security systems:

    Vehicle security system NISSAN Vehicle Immobilizer System

    The vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.

    read more

     
    Copyright © 2026 www.nimurano.com