Nissan Murano: Starting and driving / Increasing fuel economy

Nissan Murano (Z52) 2015-2024 Owners Manual / Starting and driving / Increasing fuel economy

  • Keep your engine tuned up.
  • Follow the recommended scheduled maintenance.
  • Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy.
  • Keep all the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy.
  • Use the recommendedviscosity engine oil. For additional information, refer to “Engine oil and oil filter recommendations” in the “Technical and consumer information” section of this manual.

    Fuel efficient driving tips

    Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. Use Smooth Accelerator and Brake Pedal Application Avoid rapid starts and stops...

    All-Wheel Drive (AWD) (if so equipped)

    If any malfunction occurs in the AWD system while the engine is running, messages are displayed in the meter. If the AWD error warning message is displayed, there may be a malfunction in the AWD system...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: P0524 Engine Oil Pressure


    DTC Description DTC DETECTION LOGICAn EOP sensor signal voltage applied to ECM remains lower than the specified value continuously for 10 seconds or more when the engine speed is 1,000 rpm or more. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0524 ENGINE OIL PRESSURE (Engine oil pressure too low) Diagnosis condition — Signal (terminal) Voltage signal transmitted from EOP sensor signal to ECM Threshold An EOP sensor signal voltage applied to ECM remains lower than the specified value continuously when the engine speed is 1,000 rpm or more Diagnosis delay time 10 seconds or more POSSIBLE CAUSE Decrease in engine oil pressure Decrease in engine oil level Engine oil condition EOP sensor Cause of engine oil consumption FAIL-SAFE Engine operating condition in fail-safe mode Fail safe mode Nissan Murano Vehicle behavior Engine oil pressure ECM illuminates oil pressure warning lamp on the combination meter...

    Nissan Murano (Z52) 2015-2024 Owners Manual: Checking tire pressure


    Remove the valve stem cap from the tire. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage...

    Categories

    LATCH (Lower Anchors and Tethers for CHildren) system

    Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

    LATCH system lower anchor locations - bench seat

    Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

    read more

     
    Copyright © 2025 www.nimurano.com