Nissan Murano: Ventilation, Heater & Air Conditioner / Heater & Air Conditioning Control System :: Preparation. Preparation

Nissan Murano (Z52) 2015-2024 Service Manual / Ventilation, Heater & Air Conditioner / Heater & Air Conditioning Control System :: Preparation. Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.
(TechMate No.) Tool name		Description
(J-46534) Trim Tool Set		Removing trim components

Commercial Service Tool

Tool name		Description
Power tool		Loosening nuts, screws and bolts

Heater & Air Conditioning Control System :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Heater & Air Conditioning Control System :: System Description

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Sliding Sensor

Component Function Check DATA MONITOR CONSULT Select “SLIDE PULSE” in “Data Monitor” mode of “AUTO DRIVE POS.”. Check that the function operates normally according to the following conditions: Monitor item Condition Value SLIDE PULSE Seat sliding Operate (forward) Change (decrease) Operate (backward) Change (increase) Release No change Is the inspection result normal? YES>> Inspection End...

Nissan Murano (Z52) 2015-2024 Service Manual: B26f7 Bcm

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B26F7 BCM (Body control module) Diagnosis condition When ignition switch is ON. Signal (terminal) — Threshold Inside key antenna output circuit in BCM is malfunctioning Diagnosis delay time — POSSIBLE CAUSEBCMFAIL-SAFE— DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Press door request switch...