Nissan Murano: Engine / Fuel System :: Preparation. Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.|
Tool number
(TechMate No.)
Tool name | | Description |
|
KV101207S0
( — )
Unified fuel lock ring wrench |

|
Removing and installing fuel tank lock ring |
|
—
(J-45747)
Fuel tank lock ring wrench |

|
Commercial Service Tool
| Tool name | | Description |
| Power tool |

|
Loosening nuts, screws and bolts |
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Inspection
Inspect fuel lines, fuel filler cap, and fuel tank for improper attachment, leaks, cracks, damage, loose connections, chafing or deterioration...
Other information:
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detecting condition Possible cause
P0107
ABSL PRES SEN/CIRC
(Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Low)
An excessively low voltage from the sensor is sent to ECM...
If you are wearing your seat belt properly
adjusted and you are sitting upright and
well back in your seat with both feet on the
floor, your chances of being injured or killed
in a collision and/or the severity of injury
may be greatly reduced...