Nissan Murano: Fender Protector / Fender Protector
Exploded View

| 1. |
Front fender protector |
2. |
Engine side cover |
3. |
Front over fender |
 |
Clip |
 |
Front |
|
|
Removal and Installation
REMOVAL
Position the front wheels as necessary to remove screws and clips.
Remove front over fender. Refer to Removal and Installation.
Remove engine side cover.
Release front fender protector clips and remove front fender protector.
INSTALLATION
Installation is in the reverse order of removal.
Exploded View
1.
Rear wheel house protector
2.
Rear over fender
Clip
Front
Removal and Installation
REMOVALRemove rear over fender...
Other information:
System Description
When the vehicle has reached a speed of 25 MPH (40 km/h) or greater, the BCM receives a signal transmitted from the tire pressure sensors/transmitters installed in each wheel. If the BCM detects low inflation pressure or a system malfunction, it sends a signal to the combination meter via CAN communication to illuminate the low tire pressure warning lamp...
Values on the Diagnosis Tool
CONSULT MONITOR ITEM Monitor Item Condition Value/Status
BSW/CTA WARN STATUS
BSW system is normal
On
BSW system is malfunctioning
Off
CTA SYSTEM ON
CTA system is ON
On
CTA system is OFF
Off
BSW STATUS
BSW system is ON
On
BSW system is OFF
Off
VHCL SPD SE
Indicates current Nissan Murano vehicle speed
km/h
TURN SIGNAL
Left/right turn signal is ON
On
Left/right turn signal is OFF
Off
SHIFT POSITION
Shows the position of the transmission range switch
P/R/N/D
LUMINANCE(LEFT)
Shows radar left luminance level
Hi/Lo
LUMINANCE (RIGHT)
Shows radar right luminance level
Hi/Lo
Reference Value
TERMINAL LAYOUTPHYSICAL VALUES
Terminal No...