Nissan Murano: Heater & Air Conditioning System :: Removal and Installation / Expansion Valve

Nissan Murano (Z52) 2015-2024 Service Manual / Ventilation, Heater & Air Conditioner / Heater & Air Conditioning System :: Removal and Installation / Expansion Valve

Removal and Installation

Heating and Cooling Unit Assembly Components

1. Heating and cooling unit assembly 2. Evaporator 3. Heater case side cover
4. Air mix door motor (RH) 5. Blower unit case 6. Intake door motor
7. Blower motor 8. Upper floor connecting duct (RH) 9. In-cabin microfilter cover
10. In-cabin microfilter 11. Drain hose 12. Expansion valve grommet
13. Expansion valve 14. Heater core 15. Air mix door motor (LH)
16. Aspirator hose 17. Upper floor connecting duct (LH) 18. Heater core pipe cover
19. Mode door motor (front)    

REMOVAL

Discharge the refrigerant. Refer to Recycle Refrigerant.

Remove the cowl top extension. Refer to Removal and Installation - Cowl Top Cover.

Disconnect the high-pressure pipe and internal heat exchanger from the expansion valve.

Remove the expansion valve bolts then remove the expansion valve.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

  • Do not reuse O-rings.

  • Apply A/C oil to the O-rings of the expansion valve for installation.

  • After charging refrigerant, check for leaks. Refer to Leak Test.

    Evaporator

    Removal and Installation Heating and Cooling Unit Components 1. Heating and cooling unit assembly 2. Evaporator 3. Heater case side cover 4...

    Heater & Air Conditioning System :: Service Data and Specifications (sds). Service Data and Specifications (sds)

    Compressor Type Variable displacement swash plate Displacement   175 cm3 (10.7 cu in)/rev Number of cylinders 10 Cylinder bore diameter × stroke 30...

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: Getting the spare tire and tools


    Open the rear liftgate. Pull up on the handle to lift the carpeted floorboard and attach the hook as shown. Open the storage compartment by pulling on the strap to locate the jack and tools . Remove the jack and tools from the storage area...

    Nissan Murano (Z52) 2015-2024 Owners Manual: Entry/exit function


    This system is designed so that the driver’s seat and steering column will automatically move when the shift lever is in the P (Park) position. This allows the driver to easily get in and out of the driver’s seat. The driver’s seat will slide backward and the steering wheel will move up: When the driver’s door is opened and the ignition switch is in the OFF position...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2026 www.nimurano.com