Other information:
Diagnosis Procedure
CHECK TERMINAL "B" CONNECTION
Ignition switch OFF.
Verify terminal “B” is clean and tight.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair terminal “B” connection. Confirm repair by performing system test using 165-DSS-5000P...
DTC Description
DTC DETECTION LOGIC
An excessively low voltage from the TP sensor 1 is sent to ECM.
An excessively high voltage from the TP sensor 1 is sent to ECM.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0222
TP SEN 1/CIRC-B1
(Throttle/Pedal position sensor/switch “B” circuit low)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Voltage signal transmitted from TP sensor 1 to ECM
Threshold
An excessively low voltage from the TP sensor 1 is sent to ECM
Diagnosis delay time
—
P0223
TP SEN 1/CIRC-B1
(Throttle/Pedal position sensor/switch “B” circuit high)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Voltage signal transmitted from TP sensor 1 to ECM
Threshold
An excessively high voltage from the TP sensor 1 is sent to ECM
Diagnosis delay time
—
POSSIBLE CAUSEP0222
Harness or connectors (TP sensor 1 circuit is open or shorted...