Nissan Murano: Ecu Diagnosis Information / Distance Sensor

Nissan Murano (Z52) 2015-2024 Service Manual / Brakes / Brake Control System :: Automatic Emergency Braking / Ecu Diagnosis Information / Distance Sensor

List of ECU Reference

ECU	Reference
Distance sensor (ICC sensor)	Values on the Diagnosis Tool
	Reference Value
	Fail-safe [Distance sensor (ICC sensor)]
	DTC Inspection Priority Chart
	DTC Index

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Rear Disc Brake

Exploded View 1. Torque member 2. Bushing 3. Piston boot 4. Slide pin boot 5. Slide pin 6. Piston 7. Piston seal 8. Brake caliper body 9. Bleeder cap 10. Brake hose 11. Copper sealing washers 12. Inner shim cover 13...

Nissan Murano (Z52) 2015-2024 Service Manual: B2738 Front Sensor Power

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2738–11 FRONT SENSOR POWER (Front sensor power) — Diagnosis condition Ignition switch ON Signal (terminal) Front sensor power supply (terminal 11) Threshold Front sensor power supply is short to ground Diagnosis delay time 4 seconds or more B2738–12 Diagnosis condition Ignition switch ON Signal (terminal) Front sensor power supply (terminal 11) Threshold Front sensor power supply is short to voltage Diagnosis delay time 4 seconds or more B2738–87 Diagnosis condition Ignition switch ON Signal (terminal) Front sensor power supply (terminal 11) Threshold Connection error is detected between sonar control unit and Front sonar sensors Diagnosis delay time 4 seconds or more POSSIBLE CAUSE Harness or connectors Sonar control unit FAIL-SAFEObstacle detection function is deactivated DTC Confirmation Procedure DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.