Nissan Murano: Roof :: System Description / Component Parts. Moonroof System
| A. | Overhead console in headliner | B. | View with headliner removed |
| No. | Component | Function |
|---|---|---|
| 1. | BCM (Body Control Module) |
Supplies the power supply to the moonroof and sunshade motor assembly. Refer to System Description. |
| 2. | Combination meter |
Transmits the Nissan Murano vehicle speed signal to the moonroof motor assembly via the speed sensor circuit. Refer to Combination Meter for detailed component location. |
| 3. | Front door switch LH (RH similar) |
Detects door open/close condition and transmits to BCM. Refer to Front Door Switch for detailed component location. |
| 4. | Moonroof switch | Refer to Moonroof Switch. |
| 5. | Sunshade switch | Refer to Sunshade switch. |
| 6. | Moonroof motor assembly | Refer to Moonroof Motor Assembly. |
| 7. | Sunshade motor assembly | Refer to Sunshade Motor Assembly. |
-
Moonroof switch is located in the overhead center console.
-
Transmits tilt up/slide close and tilt down/slide open signal to moonroof motor assembly.
-
Sunshade switch is located in the overhead center console.
-
Transmits slide close and slide open signal to sunshade motor assembly. The moonroof motor assembly transmits the sunshade switch signal to the sunshade motor assembly via LIN communication.
-
Moonroof motor and CPU are integrated in moonroof motor assembly.
-
Moonroof motor assembly operates moonroof to tilt up/down or slide open/close by moonroof switch operation.
-
Sunshade motor and CPU are integrated in sunshade motor assembly.
-
Sunshade motor assembly operates sunshade to slide open and slide close by sunshade switch operation.
System. Moonroof
System Diagram
System Description
MOONROOF SYSTEMINPUT/OUTPUT SIGNAL CHART Item Input signal to moonroof motor assembly Moonroof motor function Actuator
Moonroof switch
Moonroof signal (tilt up/ down or slide open/close)
Receives signal and moves the moonroof and sunshade assembly to the correct position...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: P0863 Tcm Communication
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0863 CONTROL UNIT (CAN) (TCM Communication Circuit) Diagnosis condition Engine is started Signal — Threshold An error is detected at the initial CAN diagnosis of TCM Diagnosis delay time Within 1 second POSSIBLE CAUSETCMFAIL-SAFE Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...
Nissan Murano (Z52) 2015-2024 Service Manual: P1564 Ascd Steering Switch
DTC Description DTC DETECTION LOGIC An excessively high voltage signal from the ASCD steering switch is sent to ECM. ECM detects that input signal from the ASCD steering switch is out of the specified range. ECM detects that the ASCD steering switch is stuck ON...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Turning the AEB system on/off
- Checking engine oil level
- Vehicle Dynamic Control (VDC) OFF switch
- New on site
- Most important about car
Seatback pockets
Theremaybe one or two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps.
WARNING
