Nissan Murano: Symptom Diagnosis / Combination Switch System Symptoms

Symptom Table

1. Perform the data monitor of CONSULT to check for any malfunctioning item.

2. Check the malfunction combinations.

   Malfunction item: ×

   Malfunction combination	Data monitor item
   	FR WIPER HI	FR WIPER LOW	FR WASHER SW	FR WIPER INT	INT VOLUME	RR WIPER ON	RR WIPER INT	RR WASHER SW	TURN SIGNAL R	TURN SIGNAL L	TAIL LAMP SW	HI BEAM SW	HEAD LAMP SW 1	HEAD LAMP SW 2	PASSING SW	AUTO LIGHT SW	FR FOG SW
   A		×	×						×	×
   B	×			×									×		×
   C					×			×				×		×
   D					×		×				×					×
   E					×	×											×
   F	×				×		×
   G			×		×	×		×
   H		×		×												×
   I										×				×	×		×
   J									×		×	×	×
   K	All Items
   L	If only one item is detected or the item is not applicable to the combinations A to K

3. Identify the malfunctioning part from the agreed combination and repair or replace the part.

   Malfunction combination	Malfunctioning part	Repair or replace
   A	Combination switch INPUT 1 circuit	Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure.
   B	Combination switch INPUT 2 circuit
   C	Combination switch INPUT 3 circuit
   D	Combination switch INPUT 4 circuit
   E	Combination switch INPUT 5 circuit
   F	Combination switch OUTPUT 1 circuit	Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure.
   G	Combination switch OUTPUT 2 circuit
   H	Combination switch OUTPUT 3 circuit
   I	Combination switch OUTPUT 4 circuit
   J	Combination switch OUTPUT 5 circuit
   K	BCM	Replace BCM. Refer to Removal and Installation.
   L	Combination switch	Replace the combination switch. Refer to Removal and Installation.