Nissan Murano: Brakes / Brake System :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Nissan Murano (Z52) 2015-2024 Service Manual / Brakes / Brake System :: Service Data and Specifications (sds). Service Data and Specifications (sds)

General Specifications

Unit: mm (in)

Master cylinder Cylinder bore diameter 27 (1.063)
Control valve Valve type Electric brake force distribution
Recommended brake fluid Refer to Fluids and Lubricants.
Brake Pedal

Unit: mm (in)
Item Standard
Brake pedal height (H) 196.1 – 206.1 (7.72 – 8.11)
Clearance (A) between brake pedal bracket, stop lamp switch (3) and brake pedal position switch (4) contact ends 0.74 – 1.96 (0.0291 – 0.0772)
Brake pedal full stroke (S) 135.8 (5.35)
Brake pedal play (P) 4.6 (0.18)

Unit: mm (in)
Overlap distance (X) between sub-bracket (B) and slide plate (C) 5.5 ± 0.5 (0.22 ± 0.02)
Brake Booster

Unit: mm (in)

Input rod installation standard dimension (B)

(1): Lock nut

(2): Input rod 		127.0 ± 0.75 (5.00 ± 0.03)
Front Disc Brake

Unit: mm (in)

Item Limit
Cylinder Cylinder bore diameter 45.0 (1.772) × 2
Brake pad Pad length × width × thickness (new) 131.4 (5.173) × 53.0 (2.087) × 10 (0.394)
Wear thickness 2 (0.079)
Disc brake rotor Disc brake rotor outer diameter × thickness (new) 320 (12.598) × 28 (1.102)
Wear thickness 26 (1.024)
Thickness variation (measured at 8 positions)* 0.004 (0.0002)
Runout (with disc brake rotor attached to the Nissan Murano vehicle) 0.040 (0.0016) or less

* To check if rotor imbalance, rotor runout or rotor deformation exists.

Rear Disc Brake

Unit: mm (in)

Item Limit
Cylinder Cylinder bore diameter 42.86 (1.6874)
Brake pad Pad length × width × thickness (new) 83 (3.268) × 33 (1.299) × 8.5 (0.335)
Wear thickness 2 (0.079)
Disc brake rotor Disc brake rotor outer diameter × thickness (new) 308 (12.126) × 16 (0.630)
Wear thickness 14 (0.551)
Thickness variation (measured at 8 positions)* 0.010 (0.0004)
Runout (with disc brake rotor attached to the Nissan Murano vehicle) 0.05 (0.0020) or less

* To check if rotor imbalance, rotor runout or rotor deformation exists.

    Rear Disc Brake

    Exploded View 1. Torque member 2. Bushing 3. Piston boot 4. Slide pin boot 5. Slide pin 6. Piston 7. Piston seal 8. Brake caliper body 9...

    Parking Brake System :: Precaution. Precautions

    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Front Axle :: Service Data and Specifications (sds). Service Data and Specifications (sds)


    Wheel Bearing Item Standard Axial end play 0.05 mm (0.002 in) or less Drive Shaft Joint type Wheel side Transaxle side Grease quantity 115 ± 10 g (4.06 ± 0.35 oz) 190 ± 10 g (6.70 ± 0.35 oz) Boot installed length (L) 135...

    Nissan Murano (Z52) 2015-2024 Owners Manual: Tire labeling


    Example Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the Tire Identification Number (TIN) for safety standard certification...

    Categories

    read more

     
    Copyright © 2026 www.nimurano.com