Nissan Murano: Ventilation, Heater & Air Conditioner / Ventilation System :: Preparation. Preparation

Nissan Murano (Z52) 2015-2024 Service Manual / Ventilation, Heater & Air Conditioner / Ventilation System :: Preparation. Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.
(TechMate No.) Tool name		Description
(J-46534) Trim Tool Set		Removing trim components

Commercial Service Tool

Tool name		Description
PowerTool		Loosening nuts, screws and bolts

Ventilation System :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Ventilation System :: Periodic Maintenance. In-Cabin Microfilter

Removal and Installation REMOVALRemove the center console side finisher (RH). Refer to Exploded View. Remove the glove box assembly. Refer to Removal and Installation...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Power Supply and Ground Circuit

Diagnosis Procedure CHECK FUSE Check that the following fuse is not blown: Terminal No. Signal name Fuse No. Capacity 12 IGN power supply 29 10 A Is the fuse blown? YES>> Replace the blown fuse after repairing the affected circuit...

Nissan Murano (Z52) 2015-2024 Service Manual: P2610 Ecm Internal Timer

DTC Description DESCRIPTIONThis ECM contains a timer and measures time between an ignition switch OFF and the next ignition switch ON. This enables the judging of the state of engine cooling at an engine start.DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2610 ECM/PCM INTERNAL ENG OFF TIMER (ECM/PCM internal engine off timer performance) 1 Diagnosis condition — Signal (terminal) — Threshold ECM internal engine off timer is malfunctioning Diagnosis delay time — 2 Diagnosis condition — Signal (terminal) — Threshold The time calculated by ECM based on a descent allowance of engine coolant temperatures during ignition switch OFF is extremely shorter than the time counted by the Engine internal OFF timer Diagnosis delay time — POSSIBLE CAUSE ECM ECM power supply FAIL-SAFENot applicable DTC Confirmation Procedure INSPECTION START It is necessary to erase permanent DTC? YES>> GO TO 4...