Nissan Murano: NISSAN Advanced Air Bag System (front seats) / Normal operation. Precautions

Nissan Murano (Z52) 2015-2024 Owners Manual / Safety—Seats, seat belts and supplemental restraint system / Supplemental Restraint System (SRS) / NISSAN Advanced Air Bag System (front seats) / Normal operation. Precautions

Normal operation

In order for the occupant classification sensor system to classify the front passenger based on weight, please follow the precautions and steps outlined below:

Precautions

Make sure that there are no objects weighing over 9.1 lbs. (4 kg) hanging on the seat or placed in the seatback pocket.
Make sure that a child restraint or other object is not pressing against the rear of the seatback.
Make sure that a rear passenger is not pushing or pulling on the back of the front passenger seat.
Make sure that the front passenger seat or seatback is not forced back against an object on the seat or floor behind it.

Make sure that there is no object placed under the front passenger seat.

Front passenger air bag

The front passenger air bag is designed to automatically turn OFF when the vehicle is operated under some conditions as described below in accordance withU...

Steps

Adjust the seat as outlined in the “Seats” section of this manual. Sit upright, leaning against the seatback, and centered on the seat cushion with your feet comfortably extended to the floor...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: System maintenance

The sensor is located on the front of the vehicle. To keep the system operating properly, be sure to observe the following: Always keep the sensor area of the front bumper clean. Do not strike or damage the areas around the sensor. Do not cover or attach stickers or similar objects on the front bumper near the sensor area...

Nissan Murano (Z52) 2015-2024 Service Manual: B2614 Bcm

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B2614 BCM (Body control module) Diagnosis condition Always Signal (terminal) Accessory relay-1 control Threshold The following states are compared, and they do not match for 1 second or more: State of accessory relay-1 control judged by BCM State of accessory relay-1 control signal Diagnosis delay time 1 second or more...