Nissan Murano: Power Window Switch Does Not Illuminate / Front Lh
Diagnosis Procedure
REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Replace main power window and door lock/unlock switch.
Refer to Removal and Installation.
>>
Inspection End.
Diagnosis Procedure
REPLACE REAR POWER WINDOW SWITCH LH
Replace rear power window switch LH.
Refer to Removal and Installation.
>>
Inspection End...
Other information:
DTC Description
DTC DETECTION LOGICThere is a gap between angle of target and phase-control angle degree. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0014
EXH/V TIM CONT-B1
[Exhaust valve timing control performance (bank 1)]
Diagnosis condition
—
Signal (terminal)
Exhaust valve timing control position sensor signal
Threshold
During the advanced control of exhaust valve timing control, the angle difference between actual angle and target angle is 13 degrees or more...
Connector Symbols
Most connector symbols in wiring diagrams are shown from the terminal side.
Connector symbols shown from the terminal side are enclosed by a single line and followed by the direction mark.
Connector symbols shown from the harness side are enclosed by a double line and followed by the direction mark...