Other information:
Component Function Check
DATA MONITOR
CONSULT
Select “MEMORY SW 1”, “MEMORY SW 2” and “SET SW” in “Data Monitor” mode of “AUTO DRIVE POS.”.
Check that the function operates normally according to the following conditions:
Monitor item Condition Status
MEMORY SW 1
Memory switch 1
Push
ON
Release
OFF
MEMORY SW 2
Memory switch 2
Push
ON
Release
OFF
SET SW
Set switch
Push
ON
Release
OFF
Is the inspection result normal?
YES>>
Inspection End...
The shoulder belt anchor height should be
adjusted to the position best for you. For
additional information, refer to “Precautions
on seat belt usage” in this section. To
adjust, pull out the adjustment button
and move the shoulder belt anchor to the
desired position , so the belt passes over
the center of the shoulder...