Nissan Murano: Seat :: Symptom Diagnosis / Climate Controlled Seat System

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Seat :: Symptom Diagnosis / Climate Controlled Seat System

Symptom Table

Symptom Inspection item
Climate controlled seat inoperative.

Power supply and ground circuit.

Refer to Diagnosis Procedure.
Seat back blower inoperative.

Seat back blower.

Refer to Component Function Check.
Seat cushion blower inoperative.

Seat cushion blower.

Refer to Component Function Check.
Seat cushion heater inoperative.

Seat cushion heater.

Refer to Component Function Check.

Seat cushion heater sensor.

Refer to Component Function Check.
Seat back heater inoperative.

Seat back heater.

Refer to Component Function Check.

Seat back heater sensor.

Refer to Component Function Check.
Climate controlled seat switch LO, MED or HI inoperative.

Climate controlled seat switch.

Refer to Component Function Check.
Climate controlled seat switch indicator inoperative.

Climate controlled seat switch indicator.

Refer to Component Function Check.

    Seat :: Symptom Diagnosis

    ..

    Squeak and Rattle Trouble Diagnoses

    Work Flow CUSTOMER INTERVIEWInterview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any customer's comments; refer to Diagnostic Worksheet...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: B1341 Head Unit


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1341–16 Head unit (AV control unit) [VB–LOW] Diagnosis condition When ignition switch is ON. Signal (terminal) – Threshold – Diagnosis delay time 30 seconds or more B1341–17 [VB–HIGH] Diagnosis condition When ignition switch is ON...

    Nissan Murano (Z52) 2015-2024 Service Manual: Front Suspension :: Service Data and Specifications (sds). Service Data and Specifications (sds)


    Wheel Alignment (Unladen) Measurement wheel (LH) side (RH) side Camber Degree minute (Decimal degree) Minimum –1° 04′ 30″ (–1.075°) Nominal –0° 15′ 00″ (–0.25°) Maximum 0° 34′ 30″ (0.575°) Difference (LH-RH) 0° 0′±0° 33′ (0°±0...

    Categories

    read more

     
    Copyright © 2025 www.nimurano.com