Nissan Murano: Automatic Drive Positioner :: Ecu Diagnosis Information / Bcm (body Control Module)

Automatic Drive Positioner Control Unit

Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No. (wire color) Description Condition Voltage (Approx.) + - Signal name Input/Output 1 (LG) Ground Tilt switch up signal Input Tilt switch Operate (up) 0V Other than above 5V 2 (GR) Ground Select switch RH signal Input Select switch position RH 0V Neutral or LH 5V 3 (G) Ground Mirror switch up signal Input Mirror switch Operated (up) 0V Other than above 5V 4 (P) Ground Mirror switch left signal Input Mirror switch Operated (left) 0V Other than above 5V 5 (W) Ground Door mirror sensor RH up/down signal Input Door mirror RH position Change between 3...

Automatic Drive Positioner :: Basic Inspection

..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Transaxle Side

Removal and Installation REMOVALRemove drive shaft. Refer to Removal and Installation (LH) (LH) or Removal and Installation (RH) (RH). Secure front drive shaft in a vise. CAUTION: When securing shaft in a vise, always use copper or aluminum plates between vise and shaft...

Nissan Murano (Z52) 2015-2024 Service Manual: C1b51-16 Blind Spot Warning Indicator Short Circuit

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1B51-16 BSW/BSI IND SHORT CIR (Blind Spot Warning indicator short circuit) Diagnosis condition When ignition switch is ON. Signal (terminal) – Threshold Short circuit in Blind Spot Warning indicator circuit is detected...