Nissan Murano: Symptom Diagnosis / Awd Error Is Displayed on Information Display

Nissan Murano (Z52) 2015-2024 Service Manual / Transmission & Driveline / Driveline :: Transfer: Ty21c / Symptom Diagnosis / Awd Error Is Displayed on Information Display

Diagnosis Procedure

AWD warning icon/display (AWD Error: See Owner′s Manual) is displayed on information display after the engine started.

SELECT SELF DIAGNOSTIC RESULT

CONSULT

Select “Self Diagnostic Result” mode of “ALL MODE AWD/4WD”.

Is any DTC detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

GO TO 2.

CHECK AWD WARNING ICON/DISPLAY

Perform the trouble diagnosis of the AWD warning icon/display. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Check each harness connector pin terminal for malfunction or disconnection.

NO>>

Repair or replace the error-detected parts.

Symptom Diagnosis

Heavy Tight-Corner Braking Symptom Occurs

Diagnosis Procedure Heavy tight-corner braking symptom occurs when the vehicle is driven and the steering wheel is turned fully to either side after the engine is started...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B2422 Back Door State

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2422–78 BACK DOOR STATE (Back door state) Diagnosis condition All times Signal (terminal) Encoder LH A signal, encoder LH B signal, encoder RH A signal, encoder RH B signal (automatic back door control module connector terminal: 19, 20, 21) Threshold When the automatic back door control module detect the encoder pulse signal LH does not according with the encoder pulse signal RH Diagnosis delay time – B2422–79 BACK DOOR STATE (Back door state) Diagnosis condition All times Signal (terminal) – Threshold When automatic back door position information is deleted from automatic back door control module memory Diagnosis delay time – POSSIBLE CAUSE Improper installation of back door assembly Calibration of automatic back door position information Back door mechanism Encoder Harness or connectors (encoder circuit is open or shorted) Automatic back door control module Battery terminal is disconnected and reconnected FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Calibrating Camera Image (intelligent Around View Monitor)