Nissan Murano: Body Interior / Seat :: Preparation. Preparation

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Seat :: Preparation. Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.
Tool number (TechMate No.) Tool name		Description
— (J-39570) Chassis Ear		Locating the noise
— (J-50397) Squeak and Rattle Kit		Repairing the cause of noise
— (J-46534) Trim Tool Set		Removing trim components

Commercial Service Tool

(TechMate No.) Tool name		Description
(J-39565) Engine Ear		Locating the noise

Seat :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Seat :: System Description

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: U1a04 Vin Unfinished

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U1A04 VIN UNFINISHED (VIN unfinished) Diagnosis condition When ignition switch is ON. Signal (terminal) — Threshold Nissan Murano Vehicle identification number is not written Diagnosis delay time 1 second or more POSSIBLE CAUSE VIN number is not written TCU FAIL-SAFETelematics system does not function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Key Warning Lamp

Component Function Check CHECK FUNCTION CONSULT Select “INDICATOR” in “Active Test” mode of “BCM(INTELLIGENT KEY)”. Select “KEY IND” or “KEY ON” to check that it works normally. Is the inspection result normal? YES>> Key warning lamp is OK...