Nissan Murano: Do-it-yourself / Engine compartment check locations

Maintenance precautions

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle...

Engine cooling system

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round antifreeze and coolant protection...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Exhaust System :: Removal and Installation. Exhaust System

Exploded View 1. Center exhaust tube 2. Front exhaust tube 3. Ring gasket 4. Front exhaust tube bracket 5. Gasket 6. Mounting rubber 7. Mounting rubber 8. Mounting rubber 9. Gasket 10. Muffler Front   Removal and Installation WARNING: Perform the procedure with the exhaust system fully cooled down because the system will be hot just after the engine is turned off...

Nissan Murano (Z52) 2015-2024 Service Manual: Stall Test

Work Procedure INSPECTIONCheck the engine oil level. Replenish if necessary. Refer to Inspection. Check for leak of the CVT fluid. Refer to Inspection. Drive for about 10 minutes to warm up the Nissan Murano vehicle so that the CVT fluid temperature is 50 to 80°C (122 to 176°F)...