Nissan Murano: Heater & Air Conditioning Control System :: Symptom Diagnosis / Automatic Air Conditioning System

Nissan Murano (Z52) 2015-2024 Service Manual / Ventilation, Heater & Air Conditioner / Heater & Air Conditioning Control System :: Symptom Diagnosis / Automatic Air Conditioning System

Diagnosis Chart By Symptom

NOTE:

Perform self-diagnoses with CONSULT before performing the symptom diagnosis. If DTC is detected, perform the corresponding diagnosis.

Symptom		Corresponding malfunction part	Reference
Air conditioning does not activate. Air conditioning cannot be controlled. Operation status of air conditioning is not indicated on display.		A/C auto amp. ignition power supply circuit A/C control (A/C auto amp.)	Refer to Diagnosis Procedure.
Air outlet does not change. Mode door motor does not operate normally.		Circuit between mode door motor and A/C auto amp. Mode door motor control linkage Mode door motor A/C auto amp.	Refer to DTC Diagnosis Procedure (B2636), DTC Diagnosis Procedure (B2637), DTC Diagnosis Procedure (B2638), DTC Diagnosis Procedure (B2639), DTC Diagnosis Procedure (B2654), DTC Diagnosis Procedure (B2655).
Discharge air temperature of driver side does not change. Air mix door motor LH does not operate normally.		Circuit between air mix door motor LH and A/C auto amp. Air mix door motor LH installation condition Air mix door motor LH A/C auto amp.	Refer to DTC Diagnosis Procedure (B2632), DTC Diagnosis Procedure (B2633).
Discharge air temperature of passenger side does not change. Air mix door motor RH does not operate normally.		Circuit between air mix door motor RH and A/C auto amp. Air mix door motor RH installation condition Air mix door motor RH A/C auto amp.	Refer to DTC Diagnosis Procedure (B2634), DTC Diagnosis Procedure (B2635).
Intake door does not change. Intake door motor does not operate normally.		Circuit between intake door motor and A/C auto amp. Intake door motor control linkage Intake door motor A/C auto amp.	Refer to DTC Diagnosis Procedure (B263D), DTC Diagnosis Procedure (B263E), DTC Diagnosis Procedure (B263F).
All door motors do not operate normally.		Each door motor power supply and ground circuit A/C auto amp.	Refer to Diagnosis Procedure.
Front blower motor operation is malfunctioning.		Power supply system of front blower motor Circuit between front blower motor and A/C auto amp. Front blower motor A/C auto amp.	Refer to Diagnosis Procedure.
Compressor does not operate.		Circuit between magnet clutch and IPDM E/R Magnet clutch IPDM E/R (A/C relay) Circuit between ECM and refrigerant pressure sensor Refrigerant pressure sensor CAN communication circuit A/C auto amp.	Refer to Diagnosis Procedure.
Insufficient cooling. No cool air comes out. (Air flow volume is normal.)		Magnet clutch control system Drive belt slipping Refrigerant cycle ECV (electrical control valve) Air leakage from each duct A/C auto amp. connection recognition signal circuit Temperature setting trimmer (front)	Refer to Diagnosis Procedure.
Insufficient heating. No warm air comes out. (Air flow volume is normal.)		Engine cooling system Heater hose Heater core Air leakage from each duct Temperature setting trimmer (front)	Refer to Diagnosis Procedure.
Noise is heard when front air conditioning system operates.	During A/C compressor operation	Refrigerant cycle	Refer to Symptom Table.
Noise is heard when front air conditioning system operates.	During front blower motor operation	Mixing any foreign object in front blower motor Front blower motor fan breakage Front blower motor rotation inferiority	Refer to Component Inspection (Front Blower Motor).
Memory function does not operate. Setting temperature is not memorized.		Battery power supply system of A/C auto amp. A/C auto amp.	Refer to Diagnosis Procedure.

Heater & Air Conditioning Control System :: Symptom Diagnosis

Insufficient Cooling

Diagnosis Procedure Symptom Insufficient cooling. No cool air comes out. (Air flow volume is normal.) NOTE: Perform self-diagnoses with CONSULT before performing symptom diagnosis...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0448 Evap Canister Vent Control Valve

DTC Description DTC DETECTION LOGICEVAP canister vent control valve remains closed under specified driving conditions. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0448 VENT CONTROL VALVE (Evaporative emission system vent control circuit shorted) Diagnosis condition — Signal (terminal) — Threshold EVAP canister vent control valve remains closed under specified driving conditions Diagnosis delay time — POSSIBLE CAUSE EVAP canister vent control valve EVAP control system pressure sensor and the circuit Blocked rubber tube to EVAP canister vent control valve EVAP canister is saturated with water FAIL-SAFENot applicable DTC Confirmation Procedure PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...

Nissan Murano (Z52) 2015-2024 Service Manual: U0428 Steering Angle Sensor

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0428 ST ANGLE SENSOR CALIBRATION (Steering angle sensor calibration) Diagnosis condition When ignition switch is ON Signal (terminal) — Threshold — Diagnosis delay time — POSSIBLE CAUSE Neutral position adjustment of steering angle sensor is not complete Steering angle sensor FAIL-SAFE Predicted course line is not displayed MOD (Moving Object Detection) function is stopped DTC Confirmation Procedure CHECK DTC PRIORITY If DTC U0428 is displayed with DTC U1232, first perform the diagnosis for DTC U1232...