Nissan Murano: Front Rh Side Power Window Does Not Operate / When Both Main Power Window and Door Lock/unlock Switch and Power Window and Door Lock/unlock Switch Rh Are Operated
CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH POWER SUPPLY AND GROUND CIRCUIT
Check power window and door lock/unlock switch RH power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT
Check front power window motor RH circuit.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>GO TO 1.
When Power Window and Door Lock/unlock Switch Rh Is Operated
Diagnosis Procedure
REPLACE POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
Replace power window and door lock/unlock switch RH.
Refer to Removal and Installation...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Filament
Inspection and Repair INSPECTIONWhen measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger. Attach probe circuit tester (in Volt range) to middle portion of each filament. If a filament is burned out, circuit tester registers 0 or battery voltage...
Nissan Murano (Z52) 2015-2024 Service Manual: Seat Memory Indicator
Component Function Check ACTIVE TEST CONSULT Select “MEMORY SW INDCTR” in “Active Test” mode of “AUTO DRIVE POS.”. Check that the function operates normally. Test item Description MEMORY SW INDCTR Off Memory switch indicator Off ON-1 Indicator 1: ON ON-2 Indicator 2: ON Is the operation of relevant parts normal? YES>> Inspection End...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Intelligent Forward Collision Warning (I-FCW)
- Jacking up vehicle and removing the damaged tire
- Settings
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
