Nissan Murano: Engine / Engine Lubrication System :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Nissan Murano (Z52) 2015-2024 Service Manual / Engine / Engine Lubrication System :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Oil Pressure

Unit: kPa (kg/cm², psi)

Engine speed	Approximate discharge engine oil pressure
600 rpm	98 or higher (1.0, 14)
2,000 rpm	294 (3.0, 42.6)
6,000 rpm	392 (4.0, 56.8)

Regulator Valve

Unit: mm (in)

Regulator valve to oil pump body clearance

0.040 - 0.097 (0.0016 - 0.0038)

Oil Pump

Unit: mm (in)

Oil pump body to outer rotor radial clearance	0.114 - 0.260 (0.0045 - 0.0102)
Inner rotor to outer rotor tip clearance	0.180 or below (0.0071)
Oil pump body to inner rotor side clearance	0.030 - 0.070 (0.0012 - 0.0028)
Oil pump body to outer rotor side clearance	0.030 - 0.090 (0.0012 - 0.0035)
Socket to spigot joint of oil pump body clearance	0.045 - 0.091 (0.0018 - 0.0036)

Oil Capacity

Unit: (US qt, Imp qt)

Drain and refill	With engine oil filter change	Approximately 4.8 (5-1/8, 4-1/4)
Drain and refill	Without engine oil filter change	Approximately 4.5 (4-3/4, 4)
Dry engine (engine overhaul)		Approximately 5.2 (5-1/2, 4-5/8)

Oil Cooler

Exploded View 1. Connector bolt 2. Copper gasket 3. Water drain plug 4. Water pipe 5. Bracket 6. Clamp 7. Water hose 8...

Engine Cooling System :: Vq35de

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Icc Steering Switch (other Than Main Switch) Does Not Function

Diagnosis Procedure MAIN switch can be turned ON/OFF, but the operation of RESUME/+ switch, CANCEL switch, and DISTANCE switch cannot be performed during ICC system operation.NOTE: Resume is not accepted when the following condition is met: When the MAIN switch is turned OFF once...

Nissan Murano (Z52) 2015-2024 Service Manual: Sheet Metal Work (aluminum)

Sheet Metal Work (Aluminum) Repairing aluminum alloy panels is basically the same as repairing steel panels. Special considerations for repairing aluminum alloy are listed below. Sanding Aluminum alloy panels are softer than steel plates. It is important to select the proper type and grade of sanding disc...